Long-Lasting Antimicrobials

Based on patented technology, our EnviroSystems® BioShield® line of antimicrobial solutions offers an alternative to traditional sanitizers that stop working once they dry.

BioShield® technology is a revolutionary broad-spectrum antimicrobial that provides protection against a wide range of microorganisms, including bacteria, mold, mildew, algae, and fungi. Once dry, the BioShield® layer polymerizes onto the surface, leaving a microbiostatic layer that is effective for up to 90 days. BioShield®:

  • Is registered for use as an antimicrobial under US EPA and FDA regulations to preserve food contact surfaces
  • Microbiostatic action stays effective for up to 90 days
  • May reduce the risk of shutdown or non-compliance
  • Compliments standard cleaning regimens and may improve overall cleaning efficiency
  • Inhibits typical harborage areas from microbial growth
  • Works on porous and non-porous surfaces
  • Is water-based, colorless, odorless

Applying BioShield

Clean the surface prior to BioShield® application:

Apply a general purpose cleaner/degreaser. We recommend EnviroSystems® 420-4 Green Kleen. Spray surface and allow to soak for 15 minutes, then wipe off using a clean, wet cloth. The surface should then be rinsed with clean water and allowed to thoroughly dry. This process will remove all cleaning product residues, leaving the surface properly prepared for the BioShield® application.

For environments requiring a sanitizing step, such as food service, food processing, etc. apply Novalent Sanitizer + Disinfectant at 1 part of the product to 1 part of water (food contact sanitizing). For use as a one-step hospital disinfectant, use the RTU (Ready-To-Use) Novalent Sanitizer + Disinfectant with no dilution. Allow 10-minute contact time.

Apply BioShield® for long lasting protection:

After ensuring all surfaces are thoroughly dry, apply a coating of BioShield® by spraying. Allow to dry, then apply a second coat. Once the treated surfaces are completely dry, BioShield® is active against microorganisms.

How do I know BioShield® is bonded to the surface and working?

BioShield® is odorless, colorless, and undetectable by touch. Once it’s dry, you will not smell it, see it, or be able to feel it. This is a unique formula that covalently bonds with most surfaces. When applied to a dry surface, it only take minutes to polymerize. These polymer chains are very difficult to break, and that’s why BioShield® lasts months on the surface.

The most accurate way to test the durability of BioShield® is by environmental micro testing. We recommend swabbing your treated surfaces a minimum of every 30 days until micro results begin to show evidence of contamination. For lab and test process recommendations, CONTACT US.

We have multiple lab test results illustrating long-lasting durability. To review these results, CONTACT US.

EnviroSystems® BioShield® 75 is our ready-to-use antimicrobial surface treatment. This product inhibits the growth of bacteria, mold, mildew, algae, and fungi and under normal conditions will remain effective for up to 90 days. BioShield® 75 is registered for use as an antimicrobial under US EPA and FDA regulations to preserve food contact surfaces.

How It Works: Watch the Video

EnviroSystems® BioShield® 5000C is the concentrated version of BioShield® 75. This product inhibits the growth of bacteria, mold, mildew, algae, and fungi and under normal conditions will remain effective for up to 90 days. It may be diluted and sprayed onto almost any surface.

EnviroSystems® ProShield® 5000 is specifically designed for textile and laundry applications. ProShield® 5000 is registered with the EPA and inhibits the growth of a wide array of bacteria, mold, mildew, algae, and fungi on textile materials.